Outdoor P10 full color display - parameters 
 Pixel Pitch: 10mm 
 Physical density: 10000 (point / m 2) 
 Scan type: 8 (sweep) 
 Brightness: 500cd/m2 
 Unit of board size: 320 × 160mm 
 Unit board the number of pixels: 512dot 
 LED lights package: SMD0805 
 Physical resolution: 32 × 16 = 512 points 
 Unit board weight: 195g 
 Best viewing distance: ≥ 10m 
 Best Viewing angles: Horizontal ± 75 °, vertical ± 60 degrees 
 Environment Temperature: Storage: -35 ° C ~~ +85 ° C, the work: -20 ° C to +65 ° C 
 Drive mode: constant current driver, 1/8 scan 
 Clock frequency: ≤ 25MHz 
 Unit board structure: light drive one 
 Relative Humidity: 10% ~ 95% 
 Unit of board interfaces: hub100 
 Working voltage: DC 5V ± 5% 
 Average power consumption: 5W / cell board 
 Maximum power consumption: ≤ 16W / unit board 
 Time between failures: 1000 hours 
 LED lamp life: 100,000 hours 
 Panel technical 
 Unit cabinet 
 Pixel Pitch: 10mm 
 Luminescence of a little color: 1R1PG1B 
 Primary colors: pure red + pure green + pure blue 
 Density: 10,000 / m2 
 Cabinet Size: 1280mm × 960mm × 80mm 
 Cabinet ranks: 128 points wide x high 96 points 
 Resolution: 12288 dots / box 
 Cabinet weight: 30kg / box 
 Display the entire screen 
 Visible distance: ≥ 10m 
 Viewing Angle: Horizontal ≥ 120 degrees, vertical ≥ 60 ° 
 Environment Temperature: Storage -25 ° C to +85 ° C 
 Operating Temperature: -10 ° C to +50 ° C 
 Relative Humidity: ≤ 95% 
 Screen thickness: ≤ 150mm + maintenance thickness of 800mm 
 Power supply 
 Operating voltage: AC110V/220V (single or three phase) 
 Average power consumption: 650W/m2 
 Maximum power consumption: ≤ 1100W/m2 
 Control system 
 Control Host: Pentium Ⅲ processor, 256M memory or more computers 
 Operating system: WIN98/WIN2000/WINNT 
 Control mode: Synchronization control 
 Graphics: the DVI graphics card 
 The main technical parameters 
 1)-driven devices: dedicated LED constant current drive device 
 2) Drive mode: 1/4 sweep, constant current driver 
 3) Refresh frequency: ≥ 180 frames / sec 
 4) Frame Rate: ≥ 60 frames / sec. 
 5) Gray Scale: RGB 256 
 6) White balance brightness: ≥ 1100cd/m2 
 7) Brightness adjustment: software adjustment 0-100 adjustable 
 8) Video Signal: PAL / NTSC 
 9) Video input / output mode: eight input / DVI, the VGA output. 
 10) The control system uses: DVI graphics / video processor + full-color control card 
 11) Transmission distance: cable 130m (without relay), multimode fiber 500m, 10km-20km single-mode fiber 
 12) MTBF: ≥ 10000 hours 
 13) Lifetime: 100,000 hours 
 14) Flatness: any adjacent pixels ≤ 0.5mm; module splicing gap <1 mm; 
 15) Uniformity: pixel light intensity, brightness uniformity module 
 16) Power Switch: Automatic Switch 
 17) Computer display mode: 1024 × 768 
 Software: LED playback software